Cement Trucks RIWO / GHH / SILU Compressors
Eurodealer Service provides you all types of RIWO compresors and SILO GHH compressors for your cement truck (Feldbinder, Spitzer and others).
SILU® compressors from the range of GHH InterCooler solutions deliver compressed air, cooled and without oil residues, for a range of applications, from fine powder materials to granules and viscous liquids. All these characteristics are transformed into a very durable, silent equipment, with a long service life.
INTERCOOLER SOLUTION:
• From 290 to 1,150 m3/h – air flow that allows the discharge of a wide range of products ;
• Wide range for transmission ratio, allowing adjustment of air volume;
• Compressed air cooling with temperature control;
• Options for the transmission ratio of the belts. Direct socket for CS580, CS750 and CS1200;
• Options for the direction of rotation;
• Indicator panel for monitoring the air filter, oil pressure and compressed air temperature;
• For CS580, CS750 and CS1200 the compression unit is mounted inside the truck chassis;
Low noise
• Silencer (new generation) for compressed air;
Long life span
• Anti-corrosion treatment of rotors for CS580, CS750, CS1050 and CS1200;
• Very resistant fixing supports.
The Light solution is a simplified version, offering reduced weight at a competitive price, maintaining the same quality compressor and a last-generation silencer, which significantly reduces noise.
Versatility:
• High air flow, from 290 to 1150 m3/h, to meet the requirements in industry;
• The wide range of speed adjustment of the transmission ratio, allowing the adjustment of the air flow;
• Options for the direction of rotation;
• Options for the transmission ratio of the belts;
• For CS580, CS750 and CS1200 the compression unit is mounted inside the truck chassis;
Long life span:
• Anti-corrosion treatment of rotors for CS580, CS750, CS1050 and CS1200;
• Very resistant fixing supports;
• Protection of the truck’s power take-off and transmission due to the use of V-belts, friction belts or spring bolts;
• Reduced noise due to the optimization of the transmission ratio of the belts and the use of the new generation of silencer;
• The innovative configuration of the CS580, CS750 and CS1200 allows mounting with small deviations from the straightness of the cardan shaft;
• Very simple instruments with indicators for air filter and oil pressure.
The Gardner Denver Bulkline 1050/650 screw compressors are highlighted by the possibility of using a wide range of working speeds and obtaining the corresponding variable air flows. Equipped with a technically perfect, durable and modern construction, they provide GUARANTEED COMPRESSED AIR WITHOUT OIL PARTICLES.
BENEFITS:
• The robust, easy-to-mount, fixed and bolted mounting brackets on the chassis of the tractor head are made of pressed steel and form the basis of the aggregates.
• At a suitable temperature setting and a relative air humidity of approx. 60%, a compressed air temperature below the condensation point can be obtained, which means that the water in the compressed air is stored and, e.g. when discharging the PVC granules, the electrostatic charging of the particles is inhibited
• Full automatic start/stop control of the cooling fans.
• Safety switch for the automatic assistance of the maximum allowed temperature of 120°C.
• All RIWO components are made from a superior aluminum alloy, aluminum sheets and, if there are no other requirements, from stainless steel. The same applies to the material of the screws.